Posted on by

Centinel System – Repair Manual – 009-055   Refrigerant Compressor Mounting Bracket

Install

 TOC

Sanden


Install the two mounting capscrews and the refrigerant compressor mounting bracket.

Tighten the capscrews.

Torque Value:  7  n.m  [62 in-lb]

SMALL | MEDIUM | LARGE

Climate Control Incorporated


Install the refrigerant compressor mounting bracket to the refrigerant compressor. The refrigerant compressor is positioned on top of the bracket ledge.

Install the four mounting capscrews and the refrigerant compressor bracket.

Tighten the capscrews.

Torque Value:  41  n.m  [30 ft-lb]

SMALL | MEDIUM | LARGE
   

Automotive, Industrial with CM570 and Power Generation without CM570


Before installation, inspect the refrigerant compressor bracket to make sure the mounting spacers are installed properly.

SMALL | MEDIUM | LARGE
   


Install the refrigerant compressor bracket on the gear housing with two long capscrews.

Tighten the capscrews.

Torque Value:  56  n.m  [41 ft-lb]

SMALL | MEDIUM | LARGE
   


Position both links in the assembly with the part number facing outward.

Insert one capscrew through the elongated hole in the long link and attach the long link to the left side of the refrigerant compressor bracket.

Insert one capscrew through the small hole in the short link and attach the short link to the right side of the refrigerant compressor bracket.

SMALL | MEDIUM | LARGE
Last Modified:  13-Jun-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.