Posted on by

Centinel System – Repair Manual – 009-054   Idler Pulley, Refrigerant Compressor

Preparatory Steps

 TOC

With Water Pump and Refrigerant Compressor Belt Routing


  • Remove the cooling fan drive belt. Refer to Procedure 008-002.
  • Remove the refrigerant compressor belt. Refer to Procedure 009-051.

SMALL | MEDIUM | LARGE

Remove

 TOC

With Water Pump and Refrigerant Compressor Belt Routing


Remove the pulley mounting capscrew.

Remove the refrigerant compressor idler pulley.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

With Water Pump and Refrigerant Compressor Belt Routing


Inspect the refrigerant compressor idler pulley for cracks or broken grooves. Replace idler pulley if damage is found.

Spin the refrigerant compressor idler pulley.

The refrigerant compressor idler pulley must rotate freely when installed.

SMALL | MEDIUM | LARGE
   

Install

 TOC

With Water Pump and Refrigerant Compressor Belt Routing


Install the refrigerant compressor idler pulley and the mounting capscrew.

Torque Value:  36  n.m  [27 ft-lb]

NOTE: A special alignment procedure is not required for the refrigerant compressor idler pulley to the alternator/refrigerant compressor mounting bracket.

SMALL | MEDIUM | LARGE
   

Finishing Steps

 TOC

With Water Pump and Refrigerant Compressor Belt Routing


  • Install the refrigerant compressor belt. Refer to Procedure 009-051.
  • Install the cooling fan drive belt. Refer to Procedure 008-002.

SMALL | MEDIUM | LARGE
Last Modified:  18-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.