Posted on by

Centinel System – Repair Manual – 011-033   Exhaust Gas Pressure Sensor Adapter

Preparatory Steps

 TOC

Automotive with CM870


  • Remove the exhaust gas pressure sensor. Refer to Procedure 019-376 in the Troubleshooting and Repair Manual CM870 Electronic Control System Signature and ISX Engines, Bulletin 4021334.
  • Remove the exhaust pressure sensor tube. Refer to Procedure 011-027.

SMALL | MEDIUM | LARGE

Remove

 TOC

All Applications


Remove the p-clamp mounting capscrew and remove the adapter.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

All Applications


Inspect the sensor adapter for cracks or fretting.

Replace if damage is found.

Inspect the p-clamp for cracks.

Replace if damage is found.

SMALL | MEDIUM | LARGE
   

Install

 TOC

All Applications


Install the sensor adapter and the p-clamp mounting capscrew.

Tighten the capscrew.

Torque Value:  23  n.m  [17 ft-lb]

SMALL | MEDIUM | LARGE
   

Finishing Steps

 TOC

Automotive with CM870


  • Install the exhaust pressure sensor tube. Refer to Procedure 011-027.
  • Install the exhaust gas pressure sensor. Refer to Procedure 019-376 in the Troubleshooting and Repair Manual CM870 Electronic Control System Signature and ISX Engines, Bulletin 4021334.

SMALL | MEDIUM | LARGE
Last Modified:  13-Jun-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.