Posted on by

Centinel System – Repair Manual – 013-006   Alternator Pulley

Remove

 TOC

Remove the alternator belt. Refer to Procedure 013-005.

SMALL | MEDIUM | LARGE


Remove the alternator pulley. Use a strap wrench to hold the alternator pulley.

Use a ratchet or impact wrench to loosen the nut securing the pulley to the shaft.

Remove the nut and pulley.

SMALL | MEDIUM | LARGE
   

Clean

 TOC

 WARNING 

When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer’s recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury.

Clean the pulley with solvent.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Inspect the pulley for cracks and damaged grooves or keyways. Replace the pulley if damage is found.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install key into shaft keyway (if equipped).

Install the alternator pulley with the shoulder of the pulley towards the alternator.

Lubricate the threads with engine oil and install the nut.

Torque locking nut, hold the shaft with an allen wrench, if necessary.

Torque Value:  100  n.m  [74 ft-lb]

SMALL | MEDIUM | LARGE
   


Install alternator belt. Refer to Procedure 013-005.

SMALL | MEDIUM | LARGE
Last Modified:  26-Jun-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.