Posted on by

Electronic Control System ISM and QSM11 Engines – 019-059   Intake Manifold Air Temperature Sensor

Table of Contents

General Information
 

Remove
Install
 

General Information

 TOC


The intake manifold air temperature (2) and intake manifold air pressure (1) is located on the top front half of the intake manifold. The ECM uses this information for the engine protection system.

SMALL | MEDIUM | LARGE

Remove

 TOC

Lift up on the locking tab and pull the electrical connectors apart.

Remove the sensor from the engine.

SMALL | MEDIUM | LARGE
   

Install

 TOC


Make sure the new sensor has an o-ring.

Install the new sensor into the engine. Tighten the sensor.

Torque Value:  14  n.m  [124 in-lb]

SMALL | MEDIUM | LARGE
   


Push the connectors together until they lock.

SMALL | MEDIUM | LARGE
Last Modified:  03-Jun-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.