Posted on by

ISM, ISMe, and QSM11 – 008-049   Radiator Shutter Assembly

Table of Contents

Initial Check

Initial Check

 TOC

Check the shutters in the closed position to be sure they are completely closed.

If the shutters are not closed, refer to the manufacturer’s instructions.

Be sure the shutters open completely at the desired temperature setting.

If the shutters are not open, refer to the manufacturer’s instructions.

SMALL | MEDIUM | LARGE


Shutters and thermatic fans must be set to operate in the same temperature range as the thermostat with which they are used. Compare to the Thermal Control Settings in Section V. Refer to Procedure 018-018 in Section V.

SMALL | MEDIUM | LARGE
   


Install the shutter temperature sensor in the thermostat housing.

Do not install the shutter temperature sensing unit in the radiator top (expansion) tank.

SMALL | MEDIUM | LARGE
Last Modified:  23-Jan-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.