Symptom Tree
|
Carbon buildup is excessive in the air discharge line, downstream air valves, or cylinder head |
Check for carbon buildup. Replace the air compressor discharge line and cylinder head assembly if necessary. Refer to Section 6 |
![]() |
|
Air compressor is sending air pulses into the air tanks |
Install a ping tank between the air dryer and the wet tank. Refer to the manufacturer’s instructions. |
![]() |
|
Ice buildup in the air system components |
For all models, check for ice in low spots of the air discharge line, dryer inlet, and elbow fittings. On Holset® models, also check the Econ valve (if equipped). Refer to the OEM service manual. |
![]() |
| Contact a Cummins Authorized Repair Facility |
Last Modified: 22-May-2002
