Symptom Tree
|
Fuel level is low in the tank |
Fill the supply tank. Refer to the OEM service manual. |
 |
|
Battery voltage supply to the electronic control module (ECM) is low, interrupted, or open |
Check the battery connections, the fuses, and the unswitched battery supply circuit. Refer to the OEM service manual. |
|
|
Electronic fault codes are active |
For instructions on how to read active fault codes, refer to Diagnostic Fault Codes in Section 1. If fault codes are active, contact a Cummins Authorized Repair Facility. |
|
|
Fuel supply is notadequate |
Check the flow through the filter to locate the source of the restriction. Refer to the OEM service manual. |
|
|
Air in the fuel system |
Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe, and fuel filters as necessary. |
|
|
Fuel grade is notcorrect for the application, or the fuel quality is poor |
Operate the engine from a tank of good fuel. Refer to Section V. |
|
| Contact a Cummins Authorized Repair Facility |
