Posted on by

ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 014-004   Engine Run-in (Without Dynamometer)

Table of Contents

Test

Test

 TOC

 CAUTION 

Refer to Engine Test (Engine Dynamometer) (014-005) before operating the engine to avoid internal component damage.

Operate the engine at 1500 to 1800 rpm in high gear for the first 80 to 160 km [50 to 100 mi] after rebuild.

SMALL | MEDIUM | LARGE


NOTE: Do not idle the engine for more than 5 minutes at any one time during the first 160 km [100 mi] of operation.

SMALL | MEDIUM | LARGE
Last Modified:  16-Jun-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.