Posted on by

CM871 and CM876 Electronic Control Systems, ISX and ISM Engines – 019-378   EGR Temperature Sensor

Table of Contents

Remove
Install

Remove

 TOC

Disconnect the wiring harness connector.

Remove the sensor from the EGR connection tube.

SMALL | MEDIUM | LARGE

Install

 TOC

NOTE: Make sure the sealing washer is captured on the threaded portion of the sensor.

Install the sensor and tighten.

Torque Value:  57  n.m  [42 ft-lb]

Connect the wiring harness to the sensor.

SMALL | MEDIUM | LARGE
   


Operate the engine and verify proper operation (no fault codes).

  
SMALL | MEDIUM | LARGE
Last Modified:  20-Feb-2006
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.