Detroit Series 60 EGR VNT Turbocharger Picture
Author: Ed
I'm Ed, a blogger who loves diesel engines. I share tips, reviews, and stories about repairing and maintaining them. Join me on my blog and learn more about the diesel world.
Detroit Series 60 EGR Variable Nozzle Turbocharger Picture
There are two Variable Pressure Output Devices (VPOD) that control the Variable Geometry Turbo (VNT) and the EGR system. The location of the VPODs is…
Perform the following steps to remove the PTO assembly: 1. Remove the inspection plug in the bottom of the flywheel housing and install the J…
Detroit Diesel Corporation (DDC) has a front mounted PTO, for use on the Series 60 vehicle engines.
The purpose of the EGR system is to reduce engine exhaust gas emissions in accordance with EPA regulations. EGR (exhaust gas recirculation) allows a percentage…
Before any serious work can be done, the starter must be removed from the engine, degreased, and placed on a clean bench. Disconnect one or…
Starter motors are series-wound; i.e., they are wound so that current enters the field coils and goes to the armature through the insulated brushes. Because…
There are several methods that you can use to check the starting-circuit resistance. One method is to open all the connections, scrape bright, and retighten.…
The material that follows applies to simple DC starting, charging, and instrumentation circuits. Cutting or splicing wiring harnesses used with electronic engine management systems can…