SMALL | MEDIUM | LARGE Engine Family: NT This tool is required to support the inner and outer race of the 3010150 Bearing during assembly of the bearings onto…
Author: Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
SMALL | MEDIUM | LARGE Engine Family: V28 This tool is used to press on the bearing inner race as the bearing is being pressed onto the water pump…
SMALL | MEDIUM | LARGE Engine Family: V28 This tool installs the outer bearing race and the large snap ring in the water pump body of idler type water…
SMALL | MEDIUM | LARGE Engine Family: V28 This driver is used to install a wear sleeve onto the pulley for the idler type water pump. Last Modified: 31-Jul-2003 Feedback…
SMALL | MEDIUM | LARGE Engine Family: K19, K38, NT, V28, V903 This mandrel provides a method for installing the front water pump bearings for NTA, V903, K19 and…
SMALL | MEDIUM | LARGE Engine Family: K19 This mandrel is used to install or remove the water pump bushing in the front drive support. Last Modified: 31-Jul-2003 Feedback /…
SMALL | MEDIUM | LARGE Engine Family: V28 This special driver is used to press the carbon face seal into the water pump body without damage to the seal.…
SMALL | MEDIUM | LARGE Engine Family: K19, K38, K50, NH, NT, V378, V555, V903, V504, L10, M11 This bearing mandrel is used to assemble the bearings onto the…
SMALL | MEDIUM | LARGE Engine Family: C & J, NH, NT This bearing mandrel is used to assemble water pump outer bearings having an approximate diameter of 1…
SMALL | MEDIUM | LARGE Engine Family: QST30 This tool was designed to be mounted in a vise and has a 13 tooth 16/13 DP splined hole to match…