SMALL | MEDIUM | LARGE Engine Family: QST30 This tool was designed to remove and install the water pump impeller to the proper torque during rebuild. Ref. No. Part…
Author: Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
SMALL | MEDIUM | LARGE Engine Family: L10, M11 This split jaw puller is used to remove the water pump pulley without damaging the pulley or the shaft. Ref.…
SMALL | MEDIUM | LARGE Engine Family: 88NT This tool is used to remove the water pump pulley and impeller without damaging the impeller/pulley and shaft. Ref. No. Part…
SMALL | MEDIUM | LARGE Engine Family: V555, L10, M11 This tool is used to install or remove the 3026146 impeller from the shaft used in 3027783 Water Pump…
SMALL | MEDIUM | LARGE Engine Family: NH, NT, V903, V28, K This puller uses a small hydraulic ram and an air/hydraulic pump to remove the water pump impellers…
SMALL | MEDIUM | LARGE Engine Family: NH This 2 piece spacer assembly is required when removing the plastic impellers when no puller holes are provided in the impeller.…
SMALL | MEDIUM | LARGE Engine Family: All This tool is used when pressing the shaft through the bearings during the disassembly process. Last Modified: 31-Jul-2003 Feedback / Help
SMALL | MEDIUM | LARGE Engine Family: NT This 2 piece plate assembly is required to hold the bearing spacer while pressing the bearings from the shaft. Last Modified: 30-Jul-2003…
SMALL | MEDIUM | LARGE Engine Family: L10, M11 This tool is used to install the fan hub bearing inner race onto the shaft. Last Modified: 31-Jul-2003 Feedback / Help
SMALL | MEDIUM | LARGE Engine Family: L10, M11 This tool is used to install the bearing and seal into the fan hub without damage to the bearing or…