Conditions Which Generate This Code: The ECM detects the following conditions: • The status of the service brake pedal position switch 1 and the service…
Author: Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
Conditions Which Generate This Code: The ECM detects the following conditions: • The 5 volt supply is less than 4.84 VDC for more than one…
Conditions Which Generate This Code: The ECM detects the following conditions: • The 5 volt supply is greater than 5.16 VDC for more than one…
Conditions Which Generate This Code: This condition indicates that the J1939 data link has a short circuit or an open circuit. All of the following…
Conditions Which Generate This Code: The ECM detects the following condition: • The parameter “Powertrain Data Link” must be programmed to J1939. The ECM also…
Conditions Which Generate This Code: The ECM detects the following conditions: • The engine is cranking. • The theft deterrent is active. System Response: The…
Conditions Which Generate This Code: The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent.…
Conditions Which Generate This Code: The ECM detects the following conditions: • Three attempts to complete an Eaton Top 2 shift were unsuccessful. • The…
Conditions Which Generate This Code: The ECM detects the following conditions: • The signal from the primary engine speed/timing sensor has been lost and the…
Conditions Which Generate This Code: The Engine Control Module (ECM) detects the following conditions: • The engine speed exceeded 2600 rpm for more than 0.6…