Table of Contents Remove Inspect for Reuse Remove TOC Remove the fuel hose. SMALL | MEDIUM | LARGE Next Inspect for Reuse TOC Visually inspect the inside of the…

Table of Contents Measure Measure TOC Remove the fuel supply hose to the gear pump and install the manometer, Part No. ST-1111-3. Use the appropriate…

Table of Contents Remove Install Remove TOC  WARNING  Fuel is flammable. Keep all cigarettes, flames, pilot lights, arcing equipment, and switches out of the work…

Table of Contents Measure Measure TOC Inspect the drain lines and make sure the lines do not have any loops and are not crimped. SMALL | MEDIUM | LARGE…

Table of Contents Remove Install Remove TOC Disconnect all three wiring harnesses from the ECM. Remove the six ECM mounting capscrews. These capscrews are metric.…

Table of Contents Automated Cylinder Performance Test Cylinder Cutout Test Exhaust Manifold Temperature Test Exhaust Manifold Tilt-back Method Automated Cylinder Performance Test TOC NOTE: Do not…

Table of Contents Test   Sight Glass Method Gear Pump Drain Method Test TOC Sight Glass Method Remove the fuel suction line. Install a sight…

Injectors and Fuel Lines Tool Number ST-1111-3 Mercury Filled Manometer Use to measure fuel drain line restriction. Tool Number 3375362 Sight Glass Use to check…

Table of Contents Initial Check Initial Check TOC To check for a sticking pressure regulator, install a pressure gauge on the Compuchek fitting in the…

Table of Contents Remove Install Remove TOC Remove the linkage from the VS throttle lever. SMALL | MEDIUM | LARGE Next Remove the following parts: VS housing cover Gasket…