Table of Contents Remove Install Remove TOC Remove the locknuts and jam nuts. Discard the copper washers. SMALL | MEDIUM | LARGE Next Install TOC Install new copper washers…

Table of Contents Stall Speed Check Time Speed Check   Stall Speed Too Low Stall Speed Too High Stall Speed Check TOC Converter Transmissions Stall…

View Related Topic Table of Contents Initial Check Remove Clean and Inspect for Reuse Install Initial Check TOC Remove the wire. Make sure the remaining…

Table of Contents Remove Install Remove TOC Mark the angle of the VS throttle lever on the VS throttle shaft. Remove the VS throttle lever.…

Table of Contents Adjust Adjust TOC Remove the throttle linkage from the throttle lever. Hold the VS lever counterclockwise in the idle position. Move the…

Table of Contents Adjust Adjust TOC  CAUTION  Do not make any adjustments to the throttle stop screws. If the throttle does not break over correctly,…

Table of Contents Inspect for Reuse Inspect for Reuse TOC Remove the fuel inlet connection and pulsation damper or the filter head damper assembly. Discard…

Table of Contents Adjust Adjust TOC To check the engine speed, use digital tachometer kit, Part No. 3375631, or optical tachometer, Part No. 3377462. SMALL | MEDIUM | LARGE…

Table of Contents Adjust Adjust TOC Idle Speed To adjust the VS idle speed, remove the locknut and jam nut from the screw in the…

Table of Contents Remove Install Remove TOC If the check valve in the gear pump return elbow stays open or closed, replace the elbow. SMALL | MEDIUM | LARGE…