Posted on by

N14 Base Engine Troubleshooting and Repair Manual – 005-028   Fuel Pump High Idle Speed

Table of Contents

Adjust

Adjust

 TOC

Idle Speed

To adjust the VS idle speed, remove the locknut and jam nut from the screw in the rear of the VS cover.

Install a new copper washer and the jam nut.

SMALL | MEDIUM | LARGE


Start the engine. Hold the VS lever

counterclockwise
in the idle position. Adjust the idle screw to the correct rpm and tighten the jam nut.

Install a new copper washer and locknut.

SMALL | MEDIUM | LARGE
   


High Speed

To adjust the VS high speed, remove the locknut and jam nut from the top screw of the VS cover. Discard the copper washers.

Install a new copper washer and the jam nut.

SMALL | MEDIUM | LARGE
   


Start the engine. Hold the VS lever

clockwise
in the high speed position. Adjust the screw to the correct rpm and tighten the jam nut.

Install a new copper washer and the locknut.

SMALL | MEDIUM | LARGE
Last Modified:  12-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.