Table of Contents General Information Preparatory Steps Adjust   CELECT™ or CELECT™ Plus STC Finishing Steps General Information TOC  WARNING  Batteries can emit explosive gases.…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Loosen the hose clamp at the breather vent tube. Remove the tube support bracket…

Rocker Levers Tool Number ST-669 Torque Wrench Adapter Use to torque the lock nut without disturbing the setting of the valve, injector, or crosshead. Tool…

Table of Contents General Information General Information TOC NOTE: If the cylinder head gasket(s) is being replaced because of coolant, lubricating oil, or compression leaks, use…

Table of Contents Preparatory Steps Remove Clean and Inspect for Reuse Pressure Test Leak Test Install Finishing Steps Preparatory Steps TOC  WARNING  Do not remove…

View Related Topic Table of Contents Preparatory Steps Remove Inspect for Reuse Install Finishing Steps Preparatory Steps TOC NOTE: This procedure requires the Accessory Drive Removal…

Table of Contents Measure Measure TOC A condition on CELECT™ and CELECT™ Plus engines where the engine will not start or is difficult to start…

Table of Contents Preparatory Steps Repair Preparatory Steps TOC Inspect the capscrew bosses for cracks or porosity that extend into the coolant cavities or that…

Table of Contents Initial Check Leak Test Initial Check TOC Before starting this procedure, confirm or verify the presence of an engine coolant leak from…

View Related Topic Table of Contents Preparatory Steps Remove Disassemble Clean and Inspect for Reuse Assemble Install Finishing Steps Preparatory Steps TOC  WARNING  Batteries can…