Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC  WARNING  Batteries can emit explosive gases. To avoid personal injury, always ventilate the…

Table of Contents Setup Measure Setup TOC Remove the rocker lever cover. Refer to Procedure 003-011 in Section 3. Remove the injector from cylinder number…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fuel line or fuel hose. SMALL | MEDIUM | LARGE Next Inspect for Reuse TOC Inspect the…

Table of Contents Measure Measure TOC Remove the fuel supply hose to the gear pump, and install the manometer, Part Number ST-1111-3. Use the appropriate…

Table of Contents Remove Install Remove TOC Clean the area around the fuel filter and fuel filter head. Remove the fuel filter with filter wrench,…

Table of Contents Measure Measure TOC Inspect the drain lines, and make sure the lines do not have any loops and are not kinked. Remove…

Table of Contents Preparatory Steps Remove Inspect for Reuse Install Finishing Steps Preparatory Steps TOC Remove the ECM. Refer to Procedure 019-031 in Section 19.…

Table of Contents General Information Automated Cylinder Performance Test Cylinder Cutout Test Exhaust Manifold Temperature Test Exhaust Manifold Tilt-back Method General Information TOC  WARNING  Due…

Table of Contents Test   Sight Glass Method Gear Pump Drain Method Test TOC Sight Glass Method Remove the fuel suction line. Install a sight…

Injectors and Fuel Lines Tool Number ST-434 Vacuum Gauge 0-763 mm-Hg [0 to 30 in. Hg] Used to check fuel inlet restriction. Hose adapters, Part…