Table of Contents Preparatory Steps Initial Check Remove Install Finishing Steps Preparatory Steps TOC  WARNING  Do not remove the pressure cap from a hot engine.…

Table of Contents Initial Check Initial Check TOC  WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause…

Table of Contents Compressed Air System Compressed Air System TOC Tool Number ST-302 Ball Joint Vise Used to hold the air compressor for disassembly or…

Table of Contents Initial Check Initial Check TOC Install a vacuum gauge or water manometer into the exhaust air piping. NOTE: The gauge adapter must be…

Table of Contents Remove Disassemble Clean Inspect for Reuse Assemble Install Remove TOC Remove the turbocharger. Refer to Procedure 010-033 in Section 10. SMALL | MEDIUM | LARGE Next…

Table of Contents Leak Test Leak Test TOC Add one unit of fluorescent tracer, Part Number 3376891, to each 38 liters [10.0 gal] of engine…

Table of Contents Measure Measure TOC NOTE: Use a 0.050 mm [0.002 in] blade type feeler gauge to measure the clearance between the compressor wheel and…

Table of Contents Leak Test Leak Test TOC Remove the air intake and charge-air cooler piping from the turbocharger. SMALL | MEDIUM | LARGE Next Examine the compressor intake…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the intake and the exhaust pipes from the turbocharger. SMALL | MEDIUM | LARGE Next Inspect for Reuse…

Table of Contents Measure Measure TOC Measure the axial clearance (end to end) using dial depth gauge, Part Number ST-537 or equivalent. Push the rotor…