Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 010-038   Turbocharger Axial Clearance

Table of Contents

Measure

Measure

 TOC

Measure the axial clearance (end to end) using dial depth gauge, Part Number ST-537 or equivalent.

Push the rotor assembly away from the gauge.

Set the gauge on zero (0).

SMALL | MEDIUM | LARGE


Push the rotor assembly toward the gauge and record the clearance.

Axial Clearance

mm in
0.03 MIN 0.001
0.10 MAX 0.004

Replace the turbocharger if the axial clearance does not meet the specifications. Refer to Procedure 010-033 in Section 10.

SMALL | MEDIUM | LARGE
   


Install the intake and exhaust pipes to the turbocharger and tighten the clamps.

Torque Value:  8.5  n.m  [75 in-lb]

Operate the engine and check for air leaks.

SMALL | MEDIUM | LARGE
Last Modified:  27-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.