1. Check that cylinder 1 is at top dead center (TDC on the pulley vibration damper, cylinder 6 in overlap position). 2. Apply clean engine…
Category: Paccar
To prevent damage to the air conditioning compressor bearing, from specification week 201501 the poly-V-belt was rerouted. The high load idler pulley (6) was removed…
To prevent damage to the air conditioning compressor bearing, from specification week 201501 the poly-V-belt was rerouted. The high load idler pulley (6) was removed…
To prevent damage to the air conditioning compressor bearing, from specification week 201501 the poly-V-belt was rerouted. The high load idler pulley (6) was removed…
1. Clean and check the crankshaft seal ring recess on the front cover. 2. Position the new crankshaft seal ring on the front cover. 3.…
1. Clean and check the sealing surfaces. 2. Install the front cover and tighten the attachment bolts to the specified torque. Always install a new…
– Always install new pump unit lifters if the camshaft is replaced. – Never use pump unit lifters that have been dropped, are corroded, or…