 |
Engine Family: K38, K50
This kit is required to check the alignment of the main bearing bores and can also be used to rebore the cylinder block main bearing bore as needed when service caps are used. The Kit contains the special parts needed to check or bore K38 and K50 cylinder blocks. Components of ST 1177 must also be used. These components are ST 1177-17, -18, -19, -21, -22, -23, -24, -25, -26, -27, -31, -34, -35, -51, -52, -56, and -5111.
| Ref. No. | Part No. | Description |
| 1 | 3375060 | Cutter Holder |
| 2 | 3375061 | Boring/Alignment Bar |
| 3 | 3375062 | Torsion Bar |
| 4 | 3375063 | Centering Ring |
| 5 | 3375064 | Checking Ring |
| 6 | ST 1177-3 | Cutting Tool |
Last Modified: 31-Jul-2003
;){kind=link}
;){kind=link}