|
Engine Family: All
This special tool is used to check assembled injectors for sticking plungers. With calibrated pressure on the plunger, injector body is rotated. The amount of torque required to rotate the body is registered on the dial of the torque wrench. The amount of torque will determine if plunger alignment is acceptable.
Ref. No. | Part No. | Description |
1 | 3375247 | Torque Wrench (96 in. lb.) |
2 | 3375248 | Air Cylinder |
3 | 3375249 | Pressure Gauge (0-60 PSI) |
4 | 3375250 | Air Actuator Valve |
5 | ST 990-40 | Air Regulator |
6 | ST 1141-3 | Air Filter |
7 | 3823266 | Injector Plunger Cone |
3823860 | Update Kit 91N14 and L10 | |
8 | 3823850 | Injector Support |
9 | 3823849 | Injector Plunger Guide |
Last Modified: 31-Jul-2003