Cummins Service Products Catalog – Tool 3824760Oil Seal/Wear Sleeve Installer/Puller

SMALL | MEDIUM | LARGE

Engine Family: K19

This front Oil Seal Installer/Remover is used to install the seal/sleeve assembly or by using the special puller screws, the seal can be removed. This kit contains a special chisel type wedge and protective sleeve (provided) to remove the thick wall (.060) Mather wear sleeve. The tool has a cam lobe, that wedges between the gear cover and wear sleeve. By rotating the wedge chisel, the chisel edge deforms (notches) the wear sleeve, to relieve the press fit. The wear sleeve can then be removed easily.

Ref. No. Part No. Description
1 3824761  Mandrel 
2 3824762  Special Puller Screw 
3 3824763  Expander (chisel)
4 3824764  Protective Sleeve 
5 3375099  Center Puller Screw 
Last Modified:  31-Jul-2003