019-067   Engine Oil Temperature Sensor

Table of Contents

General Information
Remove
Install

General Information

TOC

The sensor sends oil temperature data to the ECM for the engine protection system.

The N14 sensor is located in the lubricating oil pump housing.

SMALL | MEDIUM | LARGE


The L10/M11 sensor is located on the engine block behind the ECM in the main oil rifle galley.

SMALL | MEDIUM | LARGE
   

Remove

TOC

Lift up on the locking tab on the connectors and pull them apart.

SMALL | MEDIUM | LARGE
   


Remove the sensor from the engine.

SMALL | MEDIUM | LARGE
   

Install

TOC

Make sure the new sensor has an o-ring.

Install the new sensor into the engine. Tighten the sensor.

Torque Value:  14  n.m  [124 in-lb]

SMALL | MEDIUM | LARGE
   


Push the electrical connectors together until they lock.

SMALL | MEDIUM | LARGE
Last Modified:  10-Feb-2003

Leave a Reply

Your email address will not be published. Required fields are marked *