019-087   Unswitched Battery Supply Circuit

Table of Contents

General Information

General Information

TOC

The ECM receives voltage from the batteries through the switched battery wires that are connected directly to the (+) positive battery post. There are two in-line fuses in the switched battery wires to protect the ECM. The ECM receives switched battery input through the keyswitch wire, when the keyswitch is ON. The battery return wires are connected directly to the (-) negative battery post.

SMALL | MEDIUM | LARGE


The unswitched battery wires and the battery return wires are in the engine harness.

Always check the unswitched battery supply fuses when troubleshooting the ECM and power supply circuits.

Check the in-line fuses (15 A). refer to the wiring diagram or the OEM manual.

SMALL | MEDIUM | LARGE
Last Modified:  10-Feb-2003

Leave a Reply

Your email address will not be published. Required fields are marked *