M11 Industrial Operation and Maintenance – 008-049   Radiator Shutter Assembly

Table of Contents

Initial Check

Initial Check

TOC

Check the shutters and the thermatic fan every 1500 hours.

SMALL | MEDIUM | LARGE


Check the shutters in the closed position to be sure they are completely closed.

NOTE: If the shutters are not closed, refer to the manufacturer’s instructions.

SMALL | MEDIUM | LARGE
   


Be sure the shutters open completely at the desired temperature setting.

NOTE: If the shutters are not open, refer to the manufacturer’s instructions.

SMALL | MEDIUM | LARGE
   


Shutters and thermatic fans must be set to operate in the same temperature range as the thermostat with which they are used.

Refer to Procedure 101-015 (Operating the Engine) in Section 1.

SMALL | MEDIUM | LARGE
Last Modified:  09-Dec-2004