Posted on by

M11 Series – Service Manual – 008-025   Fan Clutch, Air-Engaged

General Information

 TOC

On CELECT™ and CELECT™ Plus engines, all fan clutches can be controlled by the electronic control module (ECM). The ECM is programmed to turn the fan ON when 0 VDC (normally open switch) is applied to the fan clutch relay, and turn the fan OFF when 12 VDC (normally closed switch) is applied to the fan clutch relay.

The following fan clutch checks are for fan clutches wired to the electronic controlled fuel system. Refer to the vehicle manufacturer’s specifications to determine the installation of the fan clutch.

SMALL | MEDIUM | LARGE

Maintenance Check

 TOC

This type of fan clutch is engaged by air pressure and is disengaged by spring tension.

Air pressure of 620 to 830 kPa [90 to 120 psi] is required to override the clutch spring tension to engage the fan.

  
SMALL | MEDIUM | LARGE
   


If the fan does

not operate within the temperature range indicated on the coolant temperature sensor (1), the fan clutch and the controls

must be checked. Refer to the fan clutch manufacturer’s service manual.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.