Posted on by

M11 Series – Service Manual – 008-039   Fan Spacer and Pulley

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

Remove the fan drive belt. Refer to Procedure 008-002-002.

Remove the fan and fan clutch assembly.

SMALL | MEDIUM | LARGE

Inspect for Reuse

 TOC

Inspect the fan spacer and pulley, if used, for cracks or damage. Replace if necessary.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the fan on the fan clutch assembly.

Tighten the mounting nuts to the manufacturer’s specifications.

Install the fan clutch and fan assembly on the engine.

Tighten the capscrews.

Torque Value:  68  n.m  [50 ft-lb]

Install, adjust, and tighten the fan drive belt. Refer to Procedure 008-002-026.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.