Posted on by

N14 Base Engine Troubleshooting and Repair Manual – 007-015   Lubricating Oil Filter Head

Table of Contents

Remove
Clean
Install

Remove

 TOC

NOTE: The oil cooler assembly does

not
need to be removed to replace the oil filter head.

Remove the combination full flow/bypass lubricating oil filter.

SMALL | MEDIUM | LARGE


Remove the four filter head capscrews and the filter head.

SMALL | MEDIUM | LARGE
   

Clean

 TOC

Clean all gasket surfaces.

NOTE: Do

not
allow dirt or gasket material to get into the oil passages.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Replace the oil filter head gasket.

Install the filter head, washers, and filter head capscrews.

Torque Value:  20  n.m  [15 ft-lb]

Fill and install a new oil filter.

SMALL | MEDIUM | LARGE
   


Fill and install the coolant filter.

If the oil filter head repair was done with the oil cooler assembly installed on the engine, operate the engine until the water temperature reaches 82°C [180°F] and check for oil leaks.

SMALL | MEDIUM | LARGE
Last Modified:  12-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.