Posted on by

N14 Base Engine Troubleshooting and Repair Manual – 008-027   Fan Clutch, On-Off

Preparatory Steps

 TOC

Remove the cooling fan. Refer to Procedure 008-040.

Do not discard the fan spacers. The spacers provide the thickness needed to install the fan in the correct position.

SMALL | MEDIUM | LARGE


Disconnect the signal line.

SMALL | MEDIUM | LARGE
   

Remove

 TOC

Loosen the capscrews which attach the fan hub to the bracket.

  
SMALL | MEDIUM | LARGE
   


Remove the fan hub adjusting capscrew, and remove the fan belts.

SMALL | MEDIUM | LARGE
   


Remove the fan hub capscrews, and remove the fan hub.

  
SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the fan hub assembly onto the fan hub bracket. The capscrew must not be tightened at this time.

SMALL | MEDIUM | LARGE
   


Install the fan drive belts onto the fan hub and the accessory pulley. Do not tighten the belts.

SMALL | MEDIUM | LARGE
   


Install the fan hub adjusting screw.

SMALL | MEDIUM | LARGE
   

Finishing Steps

 TOC

Install the cooling fan. Refer to Procedure 008-040.

SMALL | MEDIUM | LARGE
   


Install the fan hub signal line.

Tighten the fan belts. Refer to Procedure 008-002.

SMALL | MEDIUM | LARGE
Last Modified:  15-Feb-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.