Posted on by

M11 Plus Series Engines Operation and Maintenance Manual – 100-001   Engine Identification

Engine Dataplate

 TOC

The engine dataplate shows important facts about your engine. The engine serial number and control Parts List (CPL) provide data for ordering parts and service. The engine dataplate must not be changed unless approved by Cummins Inc.

The dataplate is located on the fuel pump side of the engine, on the rocker housing. Have the following engine data available when communicating with a Cummins Authorized Repair Location.

 
SMALL | MEDIUM | LARGE

SMALL | MEDIUM | LARGE

The following information on the dataplate is mandatory when sourcing service parts:

  1. Engine serial number (ESN)
  2. Control Parts List (CPL)
  3. Model
  4. Horsepower and rpm rating.

ECM Dataplate

 TOC

NOTE: The ECM referenced here is used with the CELECT™ and CELECT™ Plus fuel systems only.

There are two dataplates on top of the ECM.

The dataplate on the left contains the part number (P/N), serial number (S/N), and date code (D/C) of the ECM.

The dataplate on the right contains the engine serial number (ESN), fuel code (FC), and engine calibration information.

  
SMALL | MEDIUM | LARGE
   

Fuel Pump Dataplate

 TOC

The fuel pump dataplate is located on the top of the fuel pump. It provides information for fuel pump calibration.

  
SMALL | MEDIUM | LARGE
   

Cummins® Engine Nomenclature

 TOC

The Cummins engine nomenclature provides the data as illustrated in the graphic.

  
SMALL | MEDIUM | LARGE
Last Modified:  16-Nov-2004
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.