Posted on by

B5.9G, B5.9LPG – Troubleshooting and Repair Manual – 013-037   Ignition Control Harness

Table of Contents

Inspect
Continuity Check

Inspect

 TOC

Inspect the harness connectors for wear. Check for bent, loose, or worn pins on connectors. Check for corrosion and deposits in connectors. Check that the connectors mate securely and are not loose.

Refer to Section 019 in the Troubleshooting and Repair Manual, Fuel Systems and Electronics, B5.9G, C8.3G, and L10G-III Engines, Bulletin 3666118.

SMALL | MEDIUM | LARGE

Continuity Check

 TOC

Check for continuity through the wires in the harness. (Match pin A to pin A, pin B to pin B, etc.)

Refer to Section 019 in the Troubleshooting and Repair Manual, Fuel Systems and Electronics, B5.9G, C8.3G, and L10G-III Engines, Bulletin 3666118.

SMALL | MEDIUM | LARGE
Last Modified:  03-Apr-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.