Posted on by

Centinel System – Repair Manual – 008-013   Coolant Thermostat

Table of Contents

Install

Install

 TOC

Install the two thermostats into the thermostat housing cover by pushing on the outer rims.

SMALL | MEDIUM | LARGE


Install the thermostat housing cover, gasket, and four capscrews on the cylinder head.

Tighten the capscrews to the values shown.

Short Capscrews 34 n.m [25 ft-lb]
Long Capscrews 56 n.m [41 ft-lb]

SMALL | MEDIUM | LARGE
   


Connect the vent line. Refer to the OEM instructions.

Connect the coolant sensor connector.

SMALL | MEDIUM | LARGE
   


Industrial engines use a thermostat housing cover with either a cover plate or a water connection.

If removed, tighten the capscrews to the following specification.

Torque Value:  28  n.m  [20 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the upper radiator hose. Tighten the hose clamp.

Torque Value:  5  n.m  [40 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  12-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.