Posted on by

Centinel System – Repair Manual – 009-056   Alternator/Refrigerant Compressor Mounting Bracket

Remove

 TOC

Automotive with CM870


Disconnect the wire harness jumper from the EGR valve motor, EGR valve position sensor and the main engine wire harness.

Remove the five mounting capscrews from the alternator/refrigerant compressor mounting bracket.

Gently pry out the bracket from the gear housing.

The split washers will create a slight friction fit between the bracket and the gear housing.

Remove the wire harness jumper from the alternator/refrigerant compressor mounting bracket.

SMALL | MEDIUM | LARGE

Automotive with CM570


Remove the six mounting capscrews from the alternator/refrigerant compressor mounting bracket.

Gently pry out the bracket from the gear housing.

The split washers will create a slight friction between the bracket and the gear housing.

SMALL | MEDIUM | LARGE
Last Modified:  13-Jun-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.