Posted on by

Centinel System – Repair Manual – 010-121   Turbocharger, Variable Geometry Control Valve Air Supply Line

Table of Contents

Install

Install

 TOC

 CAUTION 

The turbocharger control valve is very sensitive to contamination. Failure to prevent contamination from entering the turbocharger control valve air lines will cause damage to the turbocharger control valve.
 CAUTION 

Do not use thread sealant. The use of thread sealant will cause damage to the turbocharger control valve.

Mask both ends of the turbocharger control valve air supply line before installing.

Install the turbocharger control valve air supply line.

SMALL | MEDIUM | LARGE


Connect the air supply line to the turbocharger control valve.

Torque Value:  20  n.m  [15 ft-lb]

Connect the p-clips holding air line to engine.

Torque Value:  20  n.m  [15 ft-lb]

Connect the air supply line to the turbocharger control shutoff valve.

Torque Value:  16  n.m  [12 ft-lb]

Start and run the engine.

Verify proper operation.

Check for air leaks.

SMALL | MEDIUM | LARGE
Last Modified:  19-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.