Posted on by

Centinel System – Repair Manual – 011-022   EGR Valve

Remove

 TOC

Automotive with CM870


Loosen the v-band clamp connecting the EGR valve to the exhaust manifold.

Loosen the v-band clamp connecting the EGR valve to the EGR cooler connection.

SMALL | MEDIUM | LARGE


Remove the EGR valve and v-band clamps.

Remove and discard the gaskets.

SMALL | MEDIUM | LARGE
   

Automotive With CM871


Disconnect the EGR valve electrical connector.

SMALL | MEDIUM | LARGE
   


Make sure to support the EGR valve by hand before removing the mounting capscrews. If the EGR valve is not supported, it can fall off of the engine, causing damage to the EGR valve and actuator.

  
SMALL | MEDIUM | LARGE
   


Loosen and remove the four EGR valve mounting capscrews.

Remove the EGR valve from the EGR valve support bracket.

The EGR valve will need to be moved at an angle forward and downward in order to disengage it from the EGR valve support bracket.

Use protective caps from the Air Handling Clear Care Kit to cover open points on the EGR valve and bracket.

SMALL | MEDIUM | LARGE
Last Modified:  18-May-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.