Centinel System – Repair Manual – 016-005   Flywheel

WARNING  This component weighs 23 kg [50 lb] or more. To reduce the possibility of personal injury, use a hoist or get assistance to lift the component.

Use two M6 x 1.5 guide studs to prevent the flywheel from rotating. Remove two capscrews and install the guide studs.

Use a hoist, two t-handles, and a lifting sling. Install the tee-handles. Remove the remaining ten capscrews. Remove the flywheel.

Use a soft faced mallet to tap the flywheel from the crankshaft, if necessary. Damage to the clutch surface can occur if a hard faced hammer is used.

Remove the pilot bearing spacer from the rear of the crankshaft.

Use a mandrel and hammer to remove the pilot bearing from the flywheel.