Injectors and Fuel Lines
|
TOC |
| Tool Number
ST-1111-3 |
Manometer
Used to measure fuel drain line restriction.
|
|
| Tool Number
ST-998 |
Sight Glass
Check for air in fuel suction line. Use Part Number ST-998 with Number 10 hose.
|
|
| Tool Number
3164001 |
Injector Leak Test Kit
Use in conjunction with a manometer (ST1111-3) to test injectors for leaks that cause an engine to exhibit slow shutdown or excessive run-on after a key-off condition.
|
|
| Tool Number
3376807 |
Filter Wrench
Used to remove or tighten spin-on fuel filters.
|
|
| Tool Number
3823461 |
Chip Removing Unit
Used to remove carbon from the top of the piston.
|
|
| Tool Number
3824645 |
Pressure/Vacuum Module
Used with 3377161 Digital Multimeter or 3824648 Automotive Meter. The pressure transducer range is 500 psi and the vacuum range is 29.92 in Hg.
|
|
|
Last Modified: 18-Dec-2008
Published by Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
View all posts by Jack
