Posted on by

Electronic Control System Signature, ISX and QSX15 Engines – FAULT CODE 293 (INDUSTRIAL)

OEM Temperature Sensor Circuit


Overview

CODE REASON EFFECT
Fault Code: 293
PID: S154
SPN: 1083
FMI: 3/3
LAMP: Yellow
SRT: 

High voltage detected on the OEM temperature sensor signal pin of the 31-pin OEM connector.

No engine protection for OEM temperature.
OEM Temperature Sensor Circuit
SMALL | MEDIUM | LARGE

Circuit Description

The OEM sensor signal is used by the ECM to monitor the OEM temperature. The OEM temperature is used by the ECM for the engine protection system. A sensor that has failed high can be caused by an open circuit in the signal or return wire, voltage shorts in the signal or return wire, or a faulty sensor.

Component Location

The location varies with the OEM. Use the OEM troubleshooting and repair manual.

Shop Talk

The resistance of all temperature sensors varies with the temperature.

Refer to Troubleshooting Fault Code t05-293.

Last Modified:  26-Oct-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.