|
ICON™ Lamp
|
Overview
| CODE | REASON | EFFECT |
| Fault Code: 198 PID: S122, 3 SPN: 612 FMI: 3 LAMP: Yellow SRT: |
High voltage detected at the ICON™ lamp circuit when low voltage was expected by the ECM. |
The ICON™ system will be disabled. Only mandatory shutdown will be enabled. |
 ICON™ Lamp Circuit
|
Circuit Description
The ICON™ lamp circuit illuminates the ICON™ lamp to indicate when the ICON™ system is active. In addition, ICON™ fault codes will be flashed out on this lamp. The lamp circuit requires a specific flash timing (on/off timing). If the on/off voltage is incorrect, ICON™ will be disabled. The lamp circuit must be functional to enable ICON™.
Component Location
The ICON™ lamp is located in the vehicle cab on the dash panel.
Shop Talk
This fault indicates a short circuit to battery voltage. The ICON™
lamp will only flash out the active fault codes.
Refer to Troubleshooting Fault Code t05-198
Last Modified: 02-Sep-2010
;){kind=link}
;){kind=link}