Posted on by

Electronic Control System ISM and QSM11 Engines – FAULT CODE 298 (INDUSTRIAL)

OEM Pressure Sensor Circuit


Overview

CODE REASON EFFECT
Fault Code: 298
PID: S223
SPN: 1084
FMI: 4/4
LAMP: Yellow
SRT: 

Low voltage detected at the OEM pressure sensor signal pin of the 31-pin OEM connector.

No engine protection for OEM pressure.
OEM Pressure Sensor Circuit
SMALL | MEDIUM | LARGE

Circuit Description

The OEM sensor signal is used by the ECM to monitor the OEM pressure. The OEM pressure is used by the ECM for the engine protection system. A sensor that has failed low can be caused by a short circuit to ground on the signal wire, or an internally grounded (faulty) sensor.

Component Location

The location varies with the OEM. Refer to the OEM troubleshooting and repair manual.

Shop Talk

The resistance of all pressure sensors varies with the pressure. Refer to the OEM troubleshooting and repair manual for specifications.

Refer to Troubleshooting Fault Code t05-298

Last Modified:  02-Sep-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.