Posted on by

Electronic Control System ISM and QSM11 Engines – FAULT CODE 392

Engine Brake Supply Circuit


Overview

CODE REASON EFFECT
Fault Code: 392
PID: S080
SPN: 1073
FMI: 11
LAMP: Yellow
SRT: 

Less than 6 VDC detected at engine brake circuit 2 when on indicates an excessive current draw from the electronic control module (ECM) or a faulty ECM output circuit.

Engine brake 2 can not be activated.
Engine Brake Relay Supply Circuit
SMALL | MEDIUM | LARGE

Circuit Description

The ECM enables the engine brake by sending a signal directly to the engine brakes. The ECM will only enable the engine brakes under certain operating conditions.

Component Location

Refer to an OEM diagram for the location of the engine brake.

Shop Talk

A possible cause for this fault code is an ECM engine brake driver 2 short to ground.

Refer to Troubleshooting Fault Code t05-392

Last Modified:  02-Sep-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.