Posted on by

ISM, ISMe, and QSM11 – 000-007   Engine Painting

Table of Contents

General Information

General Information

 TOC

Remove all belts from the engine.

Cover the following:

  • exhaust and intake openings
  • electrical components
  • fuel inlet and drain connections
  • any exposed fittings, thread and electrical wire terminals.

SMALL | MEDIUM | LARGE


 WARNING 

When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam will cause serious personal injury.

Use steam to clean the engine. Dry with compressed air.

NOTE: Make sure all engine surfaces are clean and dry before painting the engine.

SMALL | MEDIUM | LARGE
   


Cover the following:

  • all dataplates
  • valve and injector set marks
  • exhaust manifold
  • turbocharger turbine housing
  • flywheel
  • flywheel housing transmission mounting surface.
  
SMALL | MEDIUM | LARGE
   


Paint the engine.

  
SMALL | MEDIUM | LARGE
Last Modified:  09-Feb-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.