Posted on by

ISM, ISMe, and QSM11 – 008-007   Coolant Filter Head

Table of Contents

Install

Install

 TOC

Install a new o-ring on the valve.

Lubricate the o-ring with a film of antiseize compound.

Install the valve in the filter head.

Tighten the capscrew.

Torque Value:  10  n.m  [90 in-lb]

SMALL | MEDIUM | LARGE


Use clean 15W-40 oil to lubricate the two new o-rings.

Install the o-rings on the filter head.

SMALL | MEDIUM | LARGE
   


 CAUTION 

The control valve must be in the ON position to prevent engine damage.

Install the filter head and filter, if removed.

Tighten the capscrews.

Torque Value:  54  n.m  [40 ft-lb]

Turn the control valve to the ON position.

SMALL | MEDIUM | LARGE
Last Modified:  23-Jan-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.