ISM, ISMe, and QSM11 – 009-004   Accessory Drive Pulley

Table of Contents

Remove
 
Slip Fit
Interference Fit

Remove

TOC

Slip Fit


Remove the freon compressor drive belt, if equipped. Refer to the manufacturer’s instructions.

Remove the accessory drive pulley retaining capscrew.

SMALL | MEDIUM | LARGE


The accessory drive pulley is slip fit, and does not require a puller to be removed from the engine.

Remove the accessory drive pulley.

SMALL | MEDIUM | LARGE
   

Interference Fit


Remove the freon compressor drive, if equipped. Refer to the manufacturer’s instructions.

Remove the pulley retainer capscrew.

NOTE: Earlier production engines have a retainer snap ring and no capscrews.

SMALL | MEDIUM | LARGE
   


Use a standard puller, Part Number ST-647 or Part Number 3376104, to remove the pulley.

SMALL | MEDIUM | LARGE
Last Modified:  26-Feb-2009