Posted on by

ISM, ISMe, and QSM11 – 011-032   Heat Shield

Table of Contents

Install

Install

 TOC

Install the EGR cooler connection heat shield. The top hole in the shield locates over the stud on the water manifold mounting capscrew.

Install the nut onto the stud and the capscrew into the cylinder head.

Tighten the nut and capscrew.

Nut 20 n.m [180 in-lb]
Capscrew 45 n.m [35 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  13-Oct-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.