Posted on by

ISM, ISMe, and QSM11 – 013-009   Battery Cables and Connections

Table of Contents

Initial Check

Initial Check

 TOC

There are two possible heavy-duty battery connections:

  • Battery terminal and clamp (1)
  • Threaded battery terminal and nut (2).
  
SMALL | MEDIUM | LARGE


 WARNING 

Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

Remove and inspect the battery cables and connections for cracks or corrosion.

Replace broken terminals, connectors, or cables.

SMALL | MEDIUM | LARGE
   


If the connections are corroded, use a battery brush or wire brush to clean the connections until shiny.

Make sure all debris is removed from the connecting surfaces.

SMALL | MEDIUM | LARGE
   


 WARNING 

Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

Install the cables and tighten the battery connections.

Coat the terminals with grease to prevent corrosion.

SMALL | MEDIUM | LARGE
Last Modified:  26-Aug-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.