Posted on by

ISB/ISBe Series Engines – 019-155   Oil Pressure/Temperature Sensor

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

Disconnect the oil pressure/temperature sensor from the sensor harness.

Remove the sensor.

SMALL | MEDIUM | LARGE

Inspect for Reuse

 TOC

Inspect the engine harness connector and the oil pressure/temperature sensor for the following:

  1. Cracked or broken connector shell
  2. Missing or damaged connector seals
  3. Dirt, debris, or moisture in or on the connector pins
  4. Corroded, bent, broken, pushed back, or expanded pins.

SMALL | MEDIUM | LARGE
   


Inspect the oil pressure/temperature sensor for the following:

  1. Swollen o-ring
  2. Nicks or cuts in or on the o-ring.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the oil pressure/temperature sensor.

Torque Value:  6  n.m  [53 in-lb]

Connect the sensor to the sensor harness. An audible click will be heard when the connector locks in place.

SMALL | MEDIUM | LARGE
Last Modified:  12-Mar-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.